How To Remove Sistaco?
Answer
Verified
285k+ Views
How to Remove Using The Rapid Remover?
1. Using a nail file, gently file the Top Coat to remove the shine and leave a matte finish; so that the liquid can penetrate the Base Coat.
2. Apply a slightly thick layer of Sistaco Rapid Remover onto the nail shade. Leave for a few minutes but do not allow the Rapid Remover to harden. It should still be slightly tacky and have adhered to your application and softened it.
3. Pushing from the base of the nail, get under your application and push towards the tip of your nail with an Orange Stick to remove both the Rapid Remover and your application.
4. Wash nails thoroughly and apply Sistaco Nail Elixir for nourish.
How to remove using Rapid Removal Hub?
1. Turn lid in an anti clockwise direction to remove.
2. Pour 5-40ml of 100% Acetone into the plastic insert provided and place into the ‘well’ of the hub. Replace the lid; fixing into position.
3. Using a nail file, gently file/buff the Top Coat to remove the shine and leave a matte finish; so that the liquid can penetrate the Base Coat.
4. Turn on your Rapid Removal Hub, using the middle lower ON button. Small square lights will begin to flash, whilst your Rapid Remover heats. Once heated and ready for use the ‘Steam’ button will light up and you will hear a single beep. You can now insert your fingers into the top of the system as shown on your instruction booklet and grip the top slightly to allow the steam to better reach your nails. Be careful not to place fingers too low as to let the steam burn.
5. When the red indicator END light turns on, the steam process is completed by two beeps. Remove your fingers and gently push off your application using the Sistaco 3-in-1 nail tool. Do this immediately otherwise your nail application could harden again. If this happens you will need to repeat Step 4 again. After finishing wash your nails and apply Sistaco Elixir to nourish.
How To Remove Sustainable Nails?
1. Soak nails in warm soapy water for few minutes.
2. Use an Orange Stick to gently remove from natural nail. Never peel the Sistaco Sustainable nail from the natural nail plate.
3. Gently remove any 'Nail Tab' residue on natural nail. (Use acetone if required). Apply Sistaco Elixir to nourish.
1. Using a nail file, gently file the Top Coat to remove the shine and leave a matte finish; so that the liquid can penetrate the Base Coat.
2. Apply a slightly thick layer of Sistaco Rapid Remover onto the nail shade. Leave for a few minutes but do not allow the Rapid Remover to harden. It should still be slightly tacky and have adhered to your application and softened it.
3. Pushing from the base of the nail, get under your application and push towards the tip of your nail with an Orange Stick to remove both the Rapid Remover and your application.
4. Wash nails thoroughly and apply Sistaco Nail Elixir for nourish.
How to remove using Rapid Removal Hub?
1. Turn lid in an anti clockwise direction to remove.
2. Pour 5-40ml of 100% Acetone into the plastic insert provided and place into the ‘well’ of the hub. Replace the lid; fixing into position.
3. Using a nail file, gently file/buff the Top Coat to remove the shine and leave a matte finish; so that the liquid can penetrate the Base Coat.
4. Turn on your Rapid Removal Hub, using the middle lower ON button. Small square lights will begin to flash, whilst your Rapid Remover heats. Once heated and ready for use the ‘Steam’ button will light up and you will hear a single beep. You can now insert your fingers into the top of the system as shown on your instruction booklet and grip the top slightly to allow the steam to better reach your nails. Be careful not to place fingers too low as to let the steam burn.
5. When the red indicator END light turns on, the steam process is completed by two beeps. Remove your fingers and gently push off your application using the Sistaco 3-in-1 nail tool. Do this immediately otherwise your nail application could harden again. If this happens you will need to repeat Step 4 again. After finishing wash your nails and apply Sistaco Elixir to nourish.
How To Remove Sustainable Nails?
1. Soak nails in warm soapy water for few minutes.
2. Use an Orange Stick to gently remove from natural nail. Never peel the Sistaco Sustainable nail from the natural nail plate.
3. Gently remove any 'Nail Tab' residue on natural nail. (Use acetone if required). Apply Sistaco Elixir to nourish.
Choose healthier nails with Sistaco
Rated 4.89/5 stars - Over 300k Happy Customers
Choose healthier nails with Sistaco
Rated 4.89/5 stars - Over 300k Happy Customers