How To Remove Sistaco Nail Polish

To remove Sistaco nail polish, follow these steps:

How To remove Sistaco nail powder using the Sistaco Erase Pads?
1. Gently buff the surface of your color to remove the Top Coat.
2. Open the Erase Pad and slide it over your finger, ensuring it covers the entire nail. Secure the sides together for a snug fit. 
3. Leave the Erase Pad on for approximately 5 minutes to allow the formula to work effectively. Carefully remove the Erase Pad from the nail. 
4. Gently push off the softened manicure with an Orange Stick or manicure tool.  
5. Finish by applying our Nail Elixir for healthy, shiny and clean nails. 

How to remove Sistaco nail powder using Rapid Removal Hub?
1. Turn lid in an anti clockwise direction to remove.
2. Pour 5-40ml of 100% Acetone into the plastic insert provided and place into the ‘well’ of the hub. Replace the lid; fixing into position.
3. Using a nail file, gently file the Top Coat to break surface and remove gloss.
4. Turn on using the middle lower ON button. Small square lights will begin to flash, whilst your Rapid Remover heats. Once heated and ready for use the ‘Steam’ button will light up and you will hear a single beep. You can now insert your fingers into the top of the system as shown in your instruction booklet and grip the top slightly to allow the steam to better reach your nails. Be careful not to place fingers too low to avoid burning.
5. When the red indicator END light turns on, the steam process is completed by two beeps. Remove your fingers and gently push off your application using the Sistaco 3-in-1 nail tool. Do this immediately otherwise your nail application could harden again. If this happens you will need to repeat Step 4 again. After finishing wash your nails and use Sistaco Elixir to nourish.