How To Remove Sistaco Nail Powder?
Answer
Verified
293k+ Views
"To remove Sistaco nail powder, follow these steps:
How to remove Sistaco nail powder using the Express Remove?
1. Gently buff the surface of your color to remove the top coat.
2. Apply the Express Remover taking care to avoid the skin.
3. Wait for 2 to 3 minutes or until the color starts to bubble up.
4. Use the Sistaco 3-1 tool to gently push off the color. Never scrape the nail plate.
5. Take your time. Repeat steps 2 - 3 if required but only on the shade and never on the bare nail plate. Wash nails and use Sistaco Elixir to replace any lost moisture.
How to remove Sistaco nail powder using Rapid Removal Hub?
1. Turn lid in an anti clockwise direction to remove.
2. Pour 5-40ml of 100% Acetone into the plastic insert provided and place into the ‘well’ of the hub. Replace the lid; fixing into position.
3. Using a nail file, gently file the top coat to a matte finish, removing any gloss.
4. Turn on your Rapid Removal Hub using the middle lower ON button. Small square lights will begin to flash, whilst your Rapid Remover heats. Once heated and ready for use the ‘Steam’ button will light up and you will hear a single beep. You can now insert your fingers into the top of the system as shown in the book and grip the top slightly to allow the steam to better reach your nails. Be careful not to place fingers too low to avoid burning.
5. When the red indicator END light turns on, the steam process is completed by two beeps. Remove your fingers and gently push off your application using the Sistaco 3-in-1 nail tool. Do this immediately otherwise your nail application could harden again. If this happens you will need to repeat Step 4 again. After finishing wash your nails and use Sistaco Elixir to nourish.
How to remove Sisaco nail powder using 100% Acetone
1. Gently buff the surface of your color to penetrate the Top Coat.
2. Saturate a cotton ball with 100% acetone. Place on nail and wrap in tin foil. Leave for 10 minutes and use the 3-in-1 tool to push off your application.
3. Repeat step 2 if required. Once finished; moisturise with Sistaco Elixir; rest nails perhaps overnight and reapply the color of your choice.
How to remove Sistaco nail powder using the Express Remove?
1. Gently buff the surface of your color to remove the top coat.
2. Apply the Express Remover taking care to avoid the skin.
3. Wait for 2 to 3 minutes or until the color starts to bubble up.
4. Use the Sistaco 3-1 tool to gently push off the color. Never scrape the nail plate.
5. Take your time. Repeat steps 2 - 3 if required but only on the shade and never on the bare nail plate. Wash nails and use Sistaco Elixir to replace any lost moisture.
How to remove Sistaco nail powder using Rapid Removal Hub?
1. Turn lid in an anti clockwise direction to remove.
2. Pour 5-40ml of 100% Acetone into the plastic insert provided and place into the ‘well’ of the hub. Replace the lid; fixing into position.
3. Using a nail file, gently file the top coat to a matte finish, removing any gloss.
4. Turn on your Rapid Removal Hub using the middle lower ON button. Small square lights will begin to flash, whilst your Rapid Remover heats. Once heated and ready for use the ‘Steam’ button will light up and you will hear a single beep. You can now insert your fingers into the top of the system as shown in the book and grip the top slightly to allow the steam to better reach your nails. Be careful not to place fingers too low to avoid burning.
5. When the red indicator END light turns on, the steam process is completed by two beeps. Remove your fingers and gently push off your application using the Sistaco 3-in-1 nail tool. Do this immediately otherwise your nail application could harden again. If this happens you will need to repeat Step 4 again. After finishing wash your nails and use Sistaco Elixir to nourish.
How to remove Sisaco nail powder using 100% Acetone
1. Gently buff the surface of your color to penetrate the Top Coat.
2. Saturate a cotton ball with 100% acetone. Place on nail and wrap in tin foil. Leave for 10 minutes and use the 3-in-1 tool to push off your application.
3. Repeat step 2 if required. Once finished; moisturise with Sistaco Elixir; rest nails perhaps overnight and reapply the color of your choice.
Choose healthier nails with Sistaco
Rated 4.89/5 stars - Over 300k Happy Customers


Choose healthier nails with Sistaco
Rated 4.89/5 stars - Over 300k Happy Customers
